Alpine SPV-65-SXS 6.5″ Powersports Cage Mount Speaker Pods with Alpine KTA-30FW
Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods
You’ve enjoyed Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now you can get Alpine sound on a variety of power sport and all-terrain vehicles for an uninterrupted music experience that goes beyond the vehicle.
The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90-degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on a variety of side-by-side, UTV, and many other All-Terrain vehicles.
General Features:
- Enclosed are 6.5” Coaxial 2-Way Speakers
- 1” Teteron Dome Tweeter
- Drivers Rated IP55 Weather-Resistant
- Enclosures rated IP65 Weather-Resistant
- Steel Frame
- ASA 978 B+ Fiberglass
- Built-In Pro-Style Folding Style Clamp that will fit 1.5″-2″ Rails.
- Rotating Coated Aluminum Base
- 90-Degree Plug with 20AWG Pigtail
- 90W RMS
- 225W Peak Power Handling
- Nominal Impedance 4?
- 50-22kHz Frequency Response
- Santoprene Woofer Material
- 25mm voice coil
- Diameter: 6.5 Inches
- Impedance: 4 Ohm
- Frequency Response: 50-22000 Hz
- Peak Power Handling: 225 Watts
- Color: Black
- UPC: 793276084606
- Weight: 7
- Authorized Internet Dealer
What is in the box:
- Alpine SPV-65-SXS owner’s manual
- 2 Speaker pods with integrated mounting clamps and rubber bushings
- Two 8″ Water-proof speaker connectors (threaded connector on one end / bare wire on other ends)
- 2 Vinyl logo badges
- 2 Metal logo badges
- Instruction manual
- Warranty information
- Alpine KTA-30FW
- Class-D Full Range 4-Ohm Stable 4-Channel Amplifier
- Designed for use in Side-by-Sides, Boats, Open-Top Vehicles, and Motorcycles
- RMS Power Rating: 4 ohms: 75 watts x 4 Channel
- RMS Power Rating: 2 ohms: 75 watts x 4 Channel
- 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode)
- Total power output: 600 watts
- CEA-2006 Compliant Amplifier
- Power Wire Harness Included
- Pulse Width Modulated MOSFET power supply
- Wired remote bass level control included
- Soft start turn-on
- Switchable 4 or 2 channel operation
- Speaker-level (high-level) inputs
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Heavy-duty aluminum alloy heat-sink
- IP66 Waterproof Rating
- Input sensitivity: Low level: 0.2V-4V
- Input sensitivity: High level: 0.5V-10V
- Frequency Response: 15 – 36000 Hz
- Total Harmonic Distortion (THD): <0.1%
- Signal to Noise Ratio: >98 dB
- Variable high-pass filter: 50 – 400 Hz, 12 dB/octave
- Variable low-pass filter: 50 – 400 Hz, 12 dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
- Dimensions: 9-3/16″W x 3-3/4″D x 1-3/4″H
- Authorized Dealer
- 1-year Manufacturer’s Warranty
What is in the box:
- 4-Channel amplifier
- 14″ Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
- 4 Self-tapping screws (Length 3/4″)
- Connection sheet
- Limited Warranty sheet
- Thank you letter
- Alpine KTA-30FW Tough Power Pack owner’s manual
⚠️Warning:
Cancer and Reproductive Harm-