2 Alpine S-SB10V Loaded 10″ 600w S-W10D4 Subwoofers+KTA-30MW Weather-resistant Amplifier +Ported Sub Enclosure Box Alpine

Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure
Alpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.

This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.

Enclosure Stacking Features

Unique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.

Optimized Performance

The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.

General Features:

• S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure
• Includes S-W10D4 wired in parallel
• 600W RMS power handling
• 2Ω Impedance Ported enclosure design
• Frequency response: 28-200 Hz
• Vented enclosure tuning frequency: 36 Hz
• Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D

What is in the S-SB10V box:

• Ported enclosure loaded with one S-W10D4 subwoofer driver
• Rubber flange protector (installed on the subwoofer)

Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier

A TOUGH MINI AMP THAT PACKS A PUNCH

Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.

A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT

The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.

HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS

The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.

General Features:

• Alpine KTA-30MW
• Class D Monoblock Weather Resistant Power Pack Amplifier
• 300 Watts RMS X 1 @ 4 Ohms Power Handling
• 600 Watts RMS X 1 @ 2 Ohms Power Handling
• CTA-2006 compliant
• Frequency Response: 20-400 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: 83dB
• Variable Low Pass filter 50-400Hz @ -24dB/Oct.
• Variable Bass Boost (0-12 dB at 50 Hz)
• Fuse Rating: 25A
• Weather-resistant (IP66 rating)
• Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
• Dimensions: 7” W x 3.5” H x 1.25” D
• Authorized Dealer
• 1-year Manufacturer’s Warranty

What is in the KTA-30MW box:

• Mono amplifier
• 14″ Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
• 4 Self-tapping screws (Length 3/4″)
• Connection sheet
• Limited Warranty sheet
• KTA-30MW owner’s manual

Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo

Linking Kit for Dual 10″ Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10″ subwoofer enclosures

Add more bass to your sound system with the Linking Kit for Dual 10″ Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine’s new ProLink™ technology.

General Features:

• Aluminum rear link plate
• 10-inch Front ABS / Steel reinforced the port link
• Center link stabilizing dowels
• Alpine logo plate
• All hardware included
• Authorized Internet Dealer

What is in the KTX-H10 box:

• Front port-link
• Two 9″ front port braces
• 23.25″ Rear link-plate
• Four 25mm hex-socket screws
• Eight 14mm hex-socket screws
• Four 20mm threaded alignment posts
• 3mm Allen-key
• Installation instructions
• Safety warnings
• KTX-H10 Linking Kit owner’s manual

⚠️Warning:
Cancer and Reproductive Harm-