Rockford Fosgate Power T1000x5ad Compact 5-channel car amplifier 100 watts RMS x 4 at 2 to 4 ohms + 600 watts RMS x 1 at 1 to 2 ohms Rockford Fosgate

Rockford Fosgate Power T1000x5ad Compact 5-channel car amplifier 100 watts RMS x 4 at 2 to 4 ohms + 600 watts RMS x 1 at 1 to 2 ohms

Super-compact, bursting with power
Rockford Fosgate’s Power Series T1000X5ad 5-channel amplifier can send 100 watts RMS each to four separate speakers while delivering up to 600 watts RMS to a subwoofer. Or you could use this tiny powerpack to run a couple of high-performance components with 200 watts each along with 600 watts RMS for the sub. A dual-fan forced air cooling system keeps this sturdy little amp from overheating, so it can play hard for a long time.

Class AD: accurate and powerful
Rockford Fosgate uses their proprietary Class AD amplifier technology, combining the high fidelity of a Class A system with the high efficiency of their special Class D technology, to bring you this ultra-efficient, high-output amplifier. In other words, this compact amp produces more power with less current draw from your vehicle’s charging system than most other amps on the road today.
Rockford Fosgate’s high-tech solutions yield more power
This Power Series amplifier actively monitors speaker and subwoofer performance, using Rockford Fosgate’s Constant Power technology. A speaker’s impedance naturally fluctuates as it performs, fighting against your amp’s output. So, just like your cruise control increases the engine’s RPM to maintain your car’s speed uphill, Constant Power maintains this amp’s output by increasing its internal voltage and current flow when the speaker’s impedance rises. This results in up to a 25% increase in the amp’s total power output.

Easy to set for optimum performance
Rockford Fosgate’s C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It’s that simple — your amplifier will be perfectly set to match your receiver’s output. When your receiver reaches maximum clean volume, you’ll get maximum clean power from your Power amp. At quiet listening levels, you’ll hear less background noise and more of your music.

Clip lights monitor distortion
If that blue light turns solid red while you’re playing music, the amp’s telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music’s clipping and restore pristine sound.

Product highlights:

• 5-channel car amplifier
• 100 watts RMS x 4 + 400 watts RMS x 1 at 4 ohms
• 100 watts RMS x 4 + 600 watts RMS x 1 at 2 ohms
• 200 watts RMS x 2 bridged at 4 ohms + 600 watts RMS at 1 ohm
• CEA-2006 compliant

Features:

• Class-AD amp technology on front and rear channels; Class BD on sub channel with Constant Power topology
• C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate’s setup tones
• differential input circuitry helps eliminate hum
• dual-fan forced induction cooling
• variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels
• variable low-pass filter (50-250 Hz, 12 dB/octave) on subwoofer channel
• switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel
• variable Punch EQ bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) on all channels
• optional PLC2 wired remote level control with clip light available

More Info:

• preamp and speaker-level inputs
• signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead
• 8-gauge power and ground leads and a 100-amp fuse recommended — wiring and hardware not included with amplifier
• no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
• 12-1/2″W x 1-11/16″H x 4-5/16″D
• warranty: 2 years (extends to 3 years when purchased with an appropriate Rockford Fosgate amp wiring kit

⚠️Warning:
This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca