Rockford Fosgate Punch P1-2X12 & P500X1BD1000W Peak Punch P1 Dual 12″ Loaded Subwoofer Enclosure Ported Rockford Fosgate

 Rockford Fosgate Punch P1-2X12 & P500X1BD<BR/>1000W Peak Punch P1 Dual 12″ Loaded Subwoofer Enclosure Ported

General Features:

• Two 12″ Single 4-ohm Punch Stage 1 Subwoofers
• Total Power Handling:
• Peak: 1000 watts
• RMS: 500 watts
• Recommended power range: 250 – 600 watts RMS @ 2-ohm
• CEA-2031 Compliant
• Klippel Verified
• Flex-fit Mounting pattern
• Proprietary spider venting/cooling technique
• StampCast basket with integrated spider venting
• Sturdy 16-gauge compound bend frame geometry
• High modulus Kevlar re-inforced paper-pulp cone
• Semi-flexible, PVC removable protective motor cover
• Multi-point high-temp/high-strength neck joint bonding technique
• Tall-profile VAST Santoprene surrounds for larger surface area.
• Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
• Fatigue-resistant and reduced strain “stitched on” flexible lead wire design.
• Proprietary all-metal, radially oriented compression input terminal assembly
• Optimized motor magnetics with extended pole and bumped vented backplate.
• High temp 2″ voice coil w/ spun-laced Nomex insulating reinforcement collar.
• The die-cast aluminum soft-touch painted trim ring allows for the optional integrated grill.
• Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12
• Magnet Weight: 45 oz
• Frequency Response: 20 – 250 Hz
• Xmax: 9mm

Enclosure Features:

• Dual 12″ Loaded, Ported Box
• Solid 5/8″ MDF Construction
• Front-firing tuned port.
• Spring-loaded binding posts
• Complete with high-density black box carpeting
• Dimensions: 15-1/8″D x 33-7/8″W x 15-3/4″H

• Punch BD Series Monoblock Class BD Car Amplifier
• RMS Power Rating:
• 4 ohms: 150 watts x 1 chan.
• 2 ohms: 300 watts x 1 chan.
• 1 ohm: 500 watts x 1 chan.
• CEA-2006 compliant amplifier
• MOSFET power supply
• Muted turn-on.
• Cast aluminum heatsink.
• 12dB/octave Butterworth crossover
• Stealth top-mounted control panel
• LED power, thermal, and protection indicators.
• Nickel-plated captive C-clamp terminals.
• Ultra-efficient Class BD circuitry to maximize amplifier power efficiency.
• On-board differential inputs eliminate noise picked up by the signal cable.
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately)
• MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span.
• Built-in NOMAD is a “real-time” analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
• Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low.
• DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances, improving the efficiency of the circuit and lowering the operating temperature and potential for noise-like circuit boards designed by aerospace manufacturers.
• Input sensitivity: 150mV – 12V
• On-board Punch EQ with +18dB boost @ 45Hz.
• Variable low-pass filter: 50-250 Hz
• Selectable infrasonic filter: off / 28 Hz
• Frequency response: 20 – 250 Hz
• Total Harmonic Distortion: <1.0%
• Dimensions: 11″L x 7-3/4″W x 2-3/8″H
• 8 AWG to 18 AWG speaker wire output terminals
• Authorized Internet Dealer
• 1-year Manufacturer’s Warranty

⚠️Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.