(2) Pairs ALPINE X-S69C 6×9″ 360w Component Car Speakers+Alpine X-A70F 4-Ch Amplifier
Alpine X-S69C
X-Series 6″x9″ component speaker system
Premium Alpine components
If you’ve been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser-focus on superior imaging, this 6″x9″ component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles.
All about the build
Alpine uses a powerful magnet and a super-efficient motor structure to make the 6″x9″ woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine’s proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures.
Serious power handling
The separate 1″ carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you’ll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS.
Product highlights:
- component speaker system includes two woofers, two tweeters and two external crossover systems
- 6″x9″ nano-fiber woofer with High Amplitude Multi-Roll surround
- 1″ carbon graphite dome tweeter
- handles up to 120 watts RMS (360 watts peak power)
- frequency range: 45-50,000 Hz
- sensitivity: 89 dB
- woofer top-mount depth: 3-1/8″
- grilles included
- warranty: 1 year
- MFR # X-S69C
- 2 Woofers
- 2 Woofer grilles
- 2 Grille badges
- 2 Tweeters (each has a 26″ length of wire attached)
- 2 Tweeter grilles (installed)
- 2 Surface mount housings (with tweeters installed)
- 2 Bottom mount brackets
- Two tweeter crossovers (each has attached 32″ input and 14″ output wires)
- 2 Rectangular adhesive backed pads (crossover)
- 2 Circular adhesive backed discs (tweeter)
- Eight M4x60mm Machine screws (with washers attached)
- 8 Flat washers
- 8 Split lock washers
- Eight 1-1/8″ Screws
- Eight 5/8″ Screws
- 8 Speed-clips
- 4 Speed nuts
- Four 5″ Zip ties
- Warranty information
- Important Notice
- On-line product registration information
- Templates and specs on box
Alpine X-A70F
X-Series 4-channel car amplifier — 120 watts RMS x 4
Good music needs big power
Alpine’s X-Series X-A90F car amplifier will sharpen the focus of your music’s stereo image, almost like the musicians are playing inside your car. This 4-channel amplifier puts out 120 watts RMS per channel, so you can be sure you’ll get the big sound you want. You can also use this amp in 2-channel mode to power a couple subwoofers with 350 watts RMS each. Speaker-level inputs allow you to add this amp to almost any system, even one with a factory radio.
High-tech Class-D innards
Beefy internal components and the cleverly designed Thermal Flow chassis help the amp produce its power efficiently, with little excess heat or stress to your vehicle’s electrical system. Alpine designed this amp to exert tight control over speaker cones and deliver a very wide frequency response, so you’ll experience a very realistic soundstage. A special comparator circuit corrects the output using the original input signal, minimizing phase issues for precise, high-fidelity sound.
Hidden controls and plug-in connectors
The amp’s tuning controls sit protected under a removable top panel. Nifty speaker and power wire plugs make it easy to install or remove the amp, while ensuring tight connections and guaranteeing that your speakers work in unison. Gold-plated RCA inputs, outputs, and power connections resist corrosion and signal degradation. For a creative touch, you can paint the amp’s trim panels to match or contrast with your vehicle’s interior decor.
Product highlights:
- 4-channel car amplifier
- 120 watts RMS x 4 at 4 ohms (175 watts RMS x 4 at 2 ohms)
- 350 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
- CEA-2006 compliant
- Class-D amplifier technology
- frequency response: (+0/-1 dB) 15 to 30,000 Hz
- variable high- and low-pass filters (50-400 Hz, 12 dB/octave)
-
preamp and speaker-level inputs
- speaker-level inputs require speaker wire to RCA adapters
- quick-connect speaker connectors fit wire up to 8-gauge
- optional RUX-KNOB.2 wired remote level control for bridged channels 3/4
- fuse rating: 35A x 2
-
wiring and hardware not included with amplifier
- 4-gauge power and ground wire recommended
- 11-3/4″W x 2″H x 7-5/8″D
- warranty: 1 year
- MFR # X-A70F
- 4-Channel amplifier
- Two 35A ATO fuses (installed)
- Terminal Cover Left
- Terminal Cover Right
- Terminal Cover Front
- Battery connector plug
- 2 Speaker connector plugs
- Logo Plate (self-adhesive)
- 4 Self-tapping screws (Length 3/4″)
- 2mm Allen wrench
- 4mm Allen wrench
- Owner’s Manual
- Alpine Verification Certificate
- Limited Warranty
- To Customers sheet
- Thank you note
⚠️Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.