Alpine PSS-23WRA Powered Sound System Upgrade for 2018 – Up Jeep Wrangler Unlimited
Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL
TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORY
Enjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.
SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFF
The PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off.
EASY BOLT-IN INSTALLATION
The PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.
SIMPLE TWEETER REPLACEMENT
The SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.
WORKS WITH ANY RADIO
The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios.
General Features:
- Complete Direct Fit Audio System Upgrade
- Compatible with 2018 – Up Jeep Wrangler Unlimited JL
- Compatible with models that don’t have a factory-amplified system
- All installation hardware, such as speaker adapters and amplifier wiring, included
- CEA-2006 Compliant System
- 300 Watt RMS sound system
- The system consists of:
- 8″ Powered Subwoofer
- Universal Power Pack Amplifier
- 2″ Component Tweeters
- Tweeter Adapters
- Authorized Dealer
- 1-year Manufacturer’s Warranty
PWE-S8 Subwoofer Features:
- Peak: 240 watts
- RMS: 120 watts
- 8″ woofer high-excursion cone
- built-in Class D amplifier
- frequency response: 32-150 Hz
- variable low-pass crossover (80-200 Hz)
- variable phase control (0-180 degrees)
- preamp- and speaker-level inputs
- Dimensions: 13-1/2″W x 3″D x 9″H
KTP-445U Amplifier Features:
- RMS Power Rating:
- 4 ohms: 45 watts x 4 Channel
- 2 ohms: 45 watts x 4 Channel
- 4 ohms: 90 watts x 2 Channel (Bridged)
- Total RMS power output: 180 watts
- CEA-2006 compliant amplifier
- Increases the output of any head unit without having to install a full-size amplifier and amp install kit
- The Independent front/Rear gain switch is adjustable from high to low
- Runs off the receiver’s power circuit
- High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave
- Fast and simple installation
- 4-channel operation for four speakers
- Minimum impedance of 2 ohms
- Frequency response: 20-20,000 Hz
- Fuse Rating: 15A x 1
SPR-10TW Component Tweeters:
- 2″ Type-R Series Car Tweeters
- Power Handling:
- Peak: 450 watts per pair / 225 watts each
- RMS: 150 watts per pair / 75 watts each
- Silk Dome tweeter construction
- 4 ohms impedance
- Copper-Clad Aluminum high-temperature voice coil
- 75% smaller external crossover filter removes harmful frequencies
- 4-way tweeter level attenuation
- High-grade Neodymium magnet structure
- Surface / Bottom / Flush Mountable
- CEA-2031 compliant speakers
- Sensitivity: 88dB
- Frequency response: 1,000-29,000 Hz
- Top-mount depth: 11/16″
Vehicle Compatibility:
- JEEP
- 2018 – Up Wrangler Unlimited JL
Compatible with Wrangler JL Models that don’t have a factory amplified system
What’s in the box:
- KTP-445U amplifier
- PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket)
- 7′ Signal harness
- 12′ Loomed power wire w/ inline 20A fuse
- 52-Pin t-harness
- Four 10″ speaker to RCA harnesses
- Two SPR-10TW tweeters w/ integrated mounting plates and 8″ wire loom w/ inline crossovers
- Remote bass-level control w/ attached 16′ cable
- 3″ Strip of hook-and-loop fastener
- Ten 6″ wire-ties
- 1/2″ Self-tapping screw
- Star-washer
- 2 Alpine logos
- Installation guide
- Warranty sheet
- Alpine PSS-23WRA owner’s manual
⚠️Warning:
This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.