Alpine Type-X Bundle 2-Pair X-S65 6.5″ Coax, X-A70F 700W 4-Ch Amp, and Absolute KIT4 4 Gauge Amp Wiring Kit Alpine

Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way Speakers

SPECIFICATIONS
Woofer: 6-1/2″ cone
Tweeter: 1″ Carbon Graphite
Maximum Peak Power: 330 Watts
Maximum RMS Power: 110 Watts
impedance: 4 ohms
Sensitivity: 89 dB SPL (1W @ 1m)
Frequency Response: 55 Hz to 50 kHz
Mounting Depth/Drop-in Mounting: 2-5/16- (5.9cm)
Cutout Diameter: 5-13/32- (13.7cm) circle
Recommended Amplification: up to 110 watts RMS per channel
Warning: Both products contain a high-performance tweeter. If there is a tweeter already installed in your car, then you must disconnect its terminals. If you leave the original tweeter connected and connect this product in parallel, then a fault may develop in this product, so you are strongly recommended not to do so.

Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable Amplifier

Alpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.
The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.
General Features:

• Alpine X-Series X-A70F
• Class-D Full Range 2 ohm Stable 4-Channel Amplifier
• RMS Power Rating:
• 4 ohms: 120 watts x 4 Channel
• 2 ohms: 175 watts x 4 Channel
• 1 ohm: ————N/A———–
• Bridged, 4 Ohms: 350 Watts X 2 Channel
• Total power output: 700 watts
• CEA-2006 Compliant Amplifier
• Hi-Res Audio compatible
• Wired remote level control, Alpine RUX-KNOB.2, available
• Included plastic covers available to offer a brushed aluminum finish around the edges
• LED power (green) and protect (red) indicators
• Soft start turn-on
• 4/3/2 channel operation
• Speaker-level (high-level) inputs
• Preamp Outputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy-duty aluminum alloy heat-sink
• Input sensitivity
• High level: .4 – 10V
• Low level: .1 – 4V
• Frequency Response: 10 – 60,000
• Total Harmonic Distortion (THD): .07%
• Signal to Noise Ratio: >106dB
• Variable low-pass filter: 50 – 400Hz, -24dB/octave
• Variable subsonic filter: 50 – 40Hz, -24dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
• Fuse Rating: 35A x 3
• 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 11-3/4″W x 7-5/8″L x 2″H
• Authorized Dealer
• 1-year Manufacturer’s Warranty

What is in the X-A70M package:

• 4-Channel amplifier
• Two 35A ATO fuses (installed)
• Terminal Cover Left
• Terminal Cover Right
• Terminal Cover Front
• Battery connector plug
• 2 Speaker connector plugs
• Logo Plate (self-adhesive)
• 4 Self-tapping screws (Length 3/4″)
• 2mm Allen wrench
• 4mm Allen wrench
• Owner’s Manual
• Alpine Verification Certificate
• Limited Warranty
• To Customers sheet
• X-A70M owner’s manual