Crux SWRGM-49S Radio Replacement Interface with Steering Wheel Control Retention for GM IOS, IOT, IOU Vehicles 2019 – Up Crux

Crux SWRGM-49S Radio Replacement Interface with Steering Wheel Control Retention for GM IOS, IOT, IOU Vehicles 2019 – Up

The CRUX SWRGM-49S is a Radio Replacement interface for select General Motors vehicles 2019 – Up that use a 56 pin connector. It facilitates the integration of an after-market radio to retain factory features in GM IOS, IOT, or IOU bus vehicles. This enhanced interface is also pre-programmed for retention of steering wheel controls

General Features: 

– Retains chime functions.
– Pre-programmed to retain factory Steering Wheel Controls
– RAP (Retained Accessory Power).
– Provides illumination, parking brake, reverse, and speed sense outputs.
– Made for non-amplified vehicles or vehicles that will have their amps bypassed

Note:
– Does not retain Bose amplifier.
– Does not retain OnStar.
Note:- Does not retain Bose amplifier.
– Does not retain OnStar

Compatibility Notes:

CADILLAC
2019 – UP  XT4

CHEVROLET

2019-Up  Blazer*
2019-Up  Camaro*
2019-UP  Colorado
2019-Up  Equinox*
2019-Up  Malibu*
2019-Up  Silverado*
2019         Volt

GMC
2019-Up   Acadia*
2019-Up  Canyon
2019-Up  Sierra 1500*
2019-Up  Terrain*

NOTE:

Compatible with the following radio codes: IOS, IOT, or IOU
Note: The radio code can be found in the Glove Box.
Note: Newer model GM vehicles are now using a QR code label. If the Service Parts Identification Label is not located in the Glove Box, reference the Vehicle Certification Label on the driver’s door jamb opening for the QR code.

⚠️Warning:

Cancer and Reproductive Harm-